Operation of Tunnel Type Garment Ironing and Shapping Machine

Tunnel Garment Ironing Machine is a machine specially designed for large-scale ironing of garments. It usually consists of a long tunnel through which garments can be ironed one by one on a conveyor belt. Tunnel garment ironing machines usually have the following features: Tunnel Finisher

1. Efficient and fast: The tunnel design can accommodate multiple garments for ironing at the same time, greatly improving ironing efficiency and production speed.

2. Uniform ironing: The conveyor belt in the tunnel will smoothly transport the garments through the ironing area, ensuring that the surface of the garment is evenly heated and the ironing effect is better.

3. Automated operation: Tunnel-type garment ironing machines are usually equipped with automated control systems that can automatically adjust temperature, ironing time and conveying speed to reduce manual operations. Tunnel Finisher With Virus Disinfection

4. Multi-functional equipment: Tunnel-type clothing ironing machines usually have multiple ironing functions and can adapt to the ironing needs of different types and materials of clothing.

5. Energy saving and environmental protection: Tunnel-type clothing ironing machines usually use advanced energy-saving technology to reduce energy consumption and reduce the impact on the environment. Steam Required Shapping Machine

In short, the tunnel garment ironing machine is an efficient and automated large-scale Garment Ironing Equipment that can improve production efficiency and ironing quality. It is suitable for clothing manufacturers, laundries and other places that require a large number of garments to be ironed.

How to operate it:

1.Turn on the air source (If the pressure is more than 0.4KG, waterproof treatment is needed, otherwise it will affect the cylinder)

2.Turn on the power switch, press the running button, then press the start button.

3.First open the steam, open all five drain valves for 1-2 minutes to discharge the waste water, then close them.

4.If there is any problem with the machine, please press the emergency stop button (red) immediately and find out the problem, unscrew it, press system reset and then press Start to run again.

5.Adjust the parameters (running speed, hot air speed, temperature, steam, etc.) according to the variety of clothes.

6.Pay attention to regular maintenance of the machine. Add high-temperature bearing lubricant (high-temperature resistant lubricant) to the bearing seat of the large motor once a week. Check the noise of the hook, chain, motor, caused by loose screws, etc.